For the last 3 years I've sewn a lot of cloth diapers. And I have to say, I was really getting tired of them! The first ones I did for DS2 were copies of Happy Heinys, 8 of them, with my own home-sewn hemp inserts. The trickiest part was making the pattern because I had to trace around the original and pull the elastic as I went. Sewing them was quite fast as there aren't many pieces, but the top layer of PUL tended to slide so the ends of the seams didn't always line up. (And who's going to look?!)
The PUL and Micro Fleece lining fabrics came from Wazoodle (update: they don’t list the micro fleece lining in their Diaper section on the new website, but they use the DiaperMaker Lining Pique fabric instead…I used it for later diapers, which I write about below), and the Organic Hemp Fleece from Cloth Diapers EH!. (It looks like they don't carry the pure hemp now, but offer an organic cotton fleece instead.) I was disappointed with these diapers, as the leg seams always wicked very quickly, and in the end I gave up and switched to Kissaluvs.
Now, before DS2 was born I'd bought a dozen of the Kissaluvs Fitted diapers newborn size and loved them so much I had to make them! Over the next 2+ years I made a whole slew of copies: a handful of the newborn size, then about a dozen each of the next 2 sizes, but with Velcro instead of snaps. Snaps would have been really nice, but the presses are quite pricey. This pic is of the first few I made, the rest are simply bigger.
The fabric, also from Wazoodle, is a 14 oz. cotton sherpa that was initially made for a diaper maker customer of theirs. I'd bought 10 yards of this stuff anticipating making many, and I'm glad I did. The Kissaluv diaper design was the best of all the diapers I've used (I bought several other kinds to try out over time), but it's the most difficult to sew. The leg elastic is sewn between 2 layers before the inner and outer layers are serged around the edge. Initially I sewed the elastic using a waving stitch to make sure I'd caught it, and only after making about 20 diapers did I start to feel comfortable using a straight stitch. I'd had to do a lot of resewing to catch the elastic, and that tends to stretch it a bit too much. I have to admire the Kissaluv sewists, their diapers look great!
Last winter I needed to make more diapers for DS2 but didn't feel like making another batch of Kissaluvs copies, so I went shopping to see what was new. I decided to copy the Flip diaper! and then I might be able to make use of the hemp inserts, which were never used. In the end I made 9 of these, the first 4 of which lasted only 1 month before the PUL (from Wazoodle) totally separated! This pic is the result:
I made foldover laundry tabs (red jersey) to cover the Velcro closures, but wasn't too thrilled with them.
The next 5 were made from a (red) 2 mil PUL that I bought from Cloth Diapers EH!, and are still in great shape. I think the original Flip diapers are made from a 1 mil PUL as they have a much softer drape than my red ones. Instead of foldover laundry tabs, I sewed a piece of loop tape onto the back facing and just folded the closure tab back on it when I washed the diapers. These diapers went together pretty well, like a typical pocket diaper, except when it came to the leg elastic. The Flip diaper design has the elastic fixed at each end inside an enclosed casing, and this was a *real* hassle to sew (I had to do quite a few resews along the way). For the leg casing and tab closures I used a medium weight polyester/spandex double knit that is used in dance outfits (according to the label at Fabricland). The original Flip diaper also uses a similar fabric for the closures as it has a nice stretch and allows some give at the infant's waist.
The diaper uses a soaker pad insert, and I made about 8 of them from 2 layers of Wazoodle's ZORB (it is *FANTASTIC* stuff, I wish I'd had it earlier! I think it's very similar to Sham Wow), with a top layer of their DiaperMaker Lining Pique. This soaker was thinner and lighter than the insert that comes with the Flip diaper, but it holds a bit more liquid. (I did a comparison test with both kinds and was pretty pleased with myself! 2 cookie sheets, one for each, and measuring cups with water!)
Here it is! The final product, with my little white "no-name" label sewn into the seam by the tab closure. You can just make out the soaker pad inside.
Oh, the blood, sweat and tears!...of sewing the darn things! Unfortunately (or maybe not) I potty trained DS2 about 2 months after making these!!! Potty training with him went extremely well.
Sunday, September 5, 2010
At last! They're done...only took 3 years! These are the third pair of summer pyjamas I'd cut out for my older boy, right before my 2nd boy was born. Things got busy...I made 2 pairs before the birth, now this pair is for DS2!! And as luck would have it, red is his favourite colour.
This is KwikSew 3034. The other 2 pairs I made were great for DS1, and he liked the fact that they don't have bands on the bottom of the sleeves and pants. (He still refuses to wear pyjamas with bands.) The fabric is a soft, lightweight cotton jersey that I got from Wazoodle.
This pattern is great, it sews up really fast with a serger, including the waist elastic on the pants. The back of the neckband has a piece of navy cotton jersey covering the seam, like what you find on a lot of RTW tops. I've done this on a few tops now and love the way it finishes off the seam. The hems (and waistband finish) have been done using a triple cover stitch, which was not recommended for lightweight knits (according to my machine). After doing several trials of tweaking with the tensions I found a combination that doesn't look too bad. I sewed it on the wrong side so the looper thread is on the right side, mimicking the stitch you find on many RTW sports wear.